Hair Straighteners Can Be Divided Into Ceramic Heating Elements According To Different Heating Elements

Hair straighteners can be divided into ceramic heating elements, PTC heating elements and MCH heating elements according to different heating elements.

The advantage of the ceramic heating element is that it is environmentally friendly and has a fast heating rate. Generally, 30 seconds to 45 seconds can make the surface temperature of the splint reach 200 degrees. However, since the ceramic heating element is sintered at a high temperature of more than 1000 degrees, its temperature will quickly exceed 300 degrees after the circuit is out of control, which will burn out the plastic material that fixes the heating plate, causing the heating plate to fall off, and it may come into contact with user, and burns the skin.

PTC is the abbreviation of PositiveTemperatureCoefficient, which translates to positive temperature coefficient, referred to as PTC thermistor. PTC is also sintered at high temperature, but the temperature of its surface can be controlled during sintering. According to the requirements of the manufacturer, the surface can be sintered to below 280, or any temperature the manufacturer wants, generally sintered to 230 degrees to 280 degrees Spend. But its disadvantage is that the speed of heating up to 200 degrees is slow, generally about one and a half minutes or 2 minutes. In addition, in use, it cannot be maintained at a high temperature like a ceramic heating element. Straightening hair is slightly less effective.